Fencing

Look no further for all your Timber Fencing needs – Frank’s Timber Supplies specialise in fencing timber supply and installation and we always have stock.  (Visit our Timber Fencing website for more information on fencing installation services in Botany and surrounds).

We offer a huge selection on timber fencing products, such as:

– 100x16mm Palings.  Available lengths (in stock) 1.5m, 1.8m, 2.1m, 2.4m                                                                    (* Palings at 1.5m and 1.8m are lopped free of charge if desired.)

– 75x50mm Dressed Sawn Gauged Rail

All our Posts are H4 Treated, Outdoor Premium Grade.

They are available in several different lengths (up to 3.6m).

We generally stock our Posts in the following sizes:

– 150x50mm

– 100x75mm

-100x100mm

– Fence Capping

-Sleepers and Planks

* We also mortise posts on site to spec or as per standard mortise.

We can also offer Kiln Dried, Rougher Headed Posts or Laminated, Extreme Posts
mortised for your Project if required.

��Galvanised Steel Posts, available in a range of sizes and lengths:

50x50mm  (Available in a 2.5mm wall gauge and a   1.6mm wall Gauge)

in a range of lengths…1.8m, 2.1m, 2.4m, 3.0m, 3.6m

100x100mm (2.4m, 3.0m)
65 x 65mm (2.4, 3.0, 3.6m)
30x30mm (1.8, 3.6m)
With all steel products, longer lengths and various sizes available by order, usually here within 48 hours.

We also stock all the hardware and related Products for your Fencing Project such as

Concrete Mixes/Rapid Set etc
Fasteners: Nails (either loose or coil/ stick for most common nailing guns, such as Paslode, Hitachi, Senco, etc)

Hardware to complement Galvanised Steel Posts, such as Z Brackets, bolts, Tec Screws and Post Caps

(we also offer an assembly service fixing brackets, caps, etc to Galvanised Steel Posts)

Tools associated with Fencing Installation, such as saw blades, drill bits, driver bits, levels, hammers etc

Orders can be picked up from our Factory or can be delivered as required.
We have several different delivery vehicles to suit most sites so we can either carry out bulk drops with our crane truck, or can squeeze in tighter areas with one of our smaller vehicles if so required, just advise your preference when ordering.
Excellent loading facilities are available at our Factory.
Although we have a forklift on site, most of our customers love our
overhead gantry crane as we can load vehicles safely and accurately with it.
Loading with our overhead gantry crane eliminates risk of damaging the vehicle
as the load is lowered onto it gently from above, and the load can be placed virtually anywhere on the vehicle.
With any purchase, we are happy to offer advice on installation, which can often save time and expense
due to our extensive knowledge of products and installation techniques.